Plastic Hollow Building Formwork Making Machine For Hollow Plastic
Sheet
Descriptions:
PP plastic hollow template equipment building template production
line by using polymer nano technology, the conventional PP material
modification, the original "nano polymer additives" additive to
improve the template and can also guarantee the toughness,
hardness, the bending modulus of the overall ascension template,
improve the disadvantages of conventional plastic construction
template, the template of the deformation rate control in less than
2 mm, diagonal control within 0.5 mm, better to meet the
construction needs.
Finshed product : PP hollow construction formwork board
Eight advantages of new hollow plastic building templates:
No.1. Smooth and clean.The splicing of the formwork is strict and smooth, and the surface
degree and finish of the concrete structure after demoulding exceed
the technical requirements of the existing clear water formwork.
No.2. Portable and easy to install.Light weight, strong process adaptability, can saw, planer, drill,
nail, can be composed of any geometric shape, to meet the needs of
various shapes of building die.
No.3. Simple stripping.Concrete does not stick to the surface, no need of demoulding
agent, easy demoulding, easy to remove ash.
No.4. Stable weather resistance.High mechanical strength, in - 20 ℃ to + 60 ℃ temperature
conditions, contractive, not wet bilge, no crack, deformation,
stable size, alkali resistant anticorrosive, waterproof, flame
retardant from rat pest control.
No.5. Beneficial to maintenance.Templates do not absorb water, no special maintenance or storage.
No.6. High variability.Types, shapes and specifications can be customized according to the
requirements of construction projects.
No.7.Reduce costs.More times of turnover, plane mold turnover more than 50 times,
column and beam mold not less than 40 times, low cost.
No.8. Energy saving and environmental protection.Scrap and waste templates can be recycled, zero waste discharge.
Energy consumption:
| Installation power | Suggested 250KVA transformer |
| Cooling Water | ≤20℃, ≥0.3Mpa, ～5-6tons/hr |
| Compressed air | 0.3m3/min, ＞0.6Mpa |
| Manpower | 3 Persons/shift (24 hours need 2 shifts) |
| Hollow plastic formwork standard size(customizable) |
| Thickness(mm) | Length*With(mm) | Weight(KG) |
| 15 | 915*1830 | 14-15 |
| 16 | 915*1830 | 15-16 |
| 17 | 915*1830 | 16-17 |
| 18 | 915*1830 | 17-18 |
| 15 | 1220*2440 | 24-25 |
| 16 | 1220*2440 | 26-27 |
| 17 | 1220*2440 | 27-28 |
| 18 | 1220*2440 | 29-30 |
| All raw materials for each sheet by using new materials from
Sinopec Corp and not contain any recycled raw materials in 40
degrees Celsius high temperature weather.The expansion of sheet is
<1mm. Special sizes are available and should be confirmed before
placing an order. |
| |
| Single Production Line Equipment List |
| No. | Name | Qty. | Remark |
| 1 | Screw loader | 1set | 120 Extruder |
| 2 | Vacuum loader | 1set | 75 Extruder |
| 3 | SJ120/33 single screw extruder | 1set | |
| 4 | SJ75/33 single screw extruder | 1set | |
| 5 | Screen Changer 1 | 1set | 120 Extruder |
| 6 | Screen Changer 2 | 1set | 75 Extruder |
| 7 | Metering Pump 1 | 1set | 120 Extruder |
| 8 | 1000mm Extrusion Mould | 1set | |
| 9 | Distributor for 3 layer | 1set | |
| 10 | Vacuum Calibration Table | 1set | Three pairs of calibration modules |
| 11 | Vacuum System | 1set | |
| 12 | Cooling Bracket | 1set | 3000mm |
| 13 | Haul-off Unit | 1set | High Quality Rubber Roller |
| 14 | Cooling Bracket | 1set | 3000mm |
| 15 | Cutter | 1set | |
| 16 | Stacker | 1 | |
