HDPE PPR PP PE Pipe Machine For Plastic Pipe Making Machine
Performance advantage
A good pipeline should not only have good economy, but also have a
series of advantages such as stable and reliable interface,
material resistance to impact, anti-cracking, anti-aging and
anti-corrosion.
Advantages of HDPE piping system:
1. Reliable connection: the polyethylene pipe system is connected
by electric hot melt, and the strength of the joint is higher than
that of the pipe body.
2, good low-temperature impact resistance: polyethylene of low
temperature brittle temperature is extremely low, can be in 60-60 ℃
temperature range for safe use.Winter construction, due to the
impact resistance of the material is good, will not occur pipe
brittle crack.
3, good stress cracking resistance: HDPE has low notch sensitivity,
high shear strength and excellent scratch resistance, environmental
stress cracking resistance is also very outstanding.
4, good chemical corrosion resistance: HDPE pipeline can be
resistant to a variety of chemical medium corrosion, the presence
of chemicals in the soil will not cause any degradation of the
pipeline.Polyethylene is an electrical insulator, so it will not
rot, rust or electrochemical corrosion phenomenon;Nor does it
promote growth of algae, bacteria or fungi.
5. Aging resistance and long service life: the polyethylene pipe
containing 2-2.5% carbon black evenly distributed can be stored
outdoors or used for 50 years without being damaged by ultraviolet
radiation.
6. Good wear resistance: the comparison test of wear resistance
between HDPE pipe and steel pipe shows that the wear resistance of
HDPE pipe is 4 times of that of steel pipe.In the field of mud
transportation, HDPE pipes have better wear resistance than steel
pipes, which means longer service life and better economy of HDPE
pipes.
7, acid and alkaline resistance: HDPE pipe has a strong resistance
to chemical erosion, not affected by soil or pH value in the range
of 1.5 to 14 pollutants.
8, good flexibility: the flexibility of HDPE pipe makes it easy to
bend, engineering can change the way the pipeline around the
obstacles, in many cases, the flexibility of the pipeline can
reduce the amount of pipe fittings and reduce the cost of
installation.
Low flow resistance: the HDPE pipe has a smooth inner surface with
a manning coefficient of 0.009.Smooth performance and non-adhesive
characteristics ensure that HDPE pipes have higher delivery
capacity than traditional pipes, while reducing pipeline pressure
loss and water transmission energy consumption.
10. Easy handling: HDPE pipe is lighter than concrete pipe,
galvanized pipe and steel pipe. It is easy to handle and install.
11, a variety of new construction methods: HDPE pipe has a variety
of construction technology, in addition to the traditional
excavation method may be used for construction, can also use a
variety of new trenchless technologies such as pipe jacking,
directional drilling, liner, in the form of pipe and construction,
for some do not allow the excavation sites, is a good choice, so
the HDPE pipe wider application fields.
Machine list & Quotation
| No. | Name | Qty. |
| 1 | Vacuum feeder 200kg/h | 1set |
| 2 | Plastic hopper dryer 100kg/h | 1set |
| 3 | SJ60 single screw extruder | 1set |
| 4 | Mould | 1set |
| 5 | Co- extruder 25/25 | 1set |
| 6 | Two chambers Vacuum Calibration tank | 1set |
| 7 | Spray cooling tank | 2sets |
| 8 | Two claws haul-off | 1set |
| 9 | Uplift saw cutter | 1set |
| 10 | Stacker | 1set |
| Total amount |
